Tootegrupid

RAM MOUNT JUHTRAUA KINNITUS B-231ZU 0.5-1.25"

Tootekood: RAM-B-231ZU
Kaubamärk: RamMount
Ühik: tk
Laoseis: 8
Hind:
21,00 €
Kogus: - +
The RAM-B-231ZU consists of a B size 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
Sarnased tooted
,   Laoseis: 2
35,00 €
Lowrance kõige kergemini seadistatav kalaleidja HOOK2 4x Bullet on lihtsa menüüga ja automaatsete sonari seadistusega.
Hook2-4x põhiomadused:
- 4-tolline SolarMAX™ ekraan
- Autotuning sonar-Muudab sonari pildi automaatselt kvaliteetsemaks, mistõttu puudub vajadus käsitsi seadete korrigeerimiseks. Samas on ka võimalus seadeid käsitsi muuta.
- Mugav kasutada- Lihtne ja käepärane eestikeelne menüü
- Lowrance® Wide-Angle Broadband sonar (kaks korda tavalisest laiem tuvastusala)
,   Laoseis: 1
130,80 €
Veekindel, kompaktne seade eeskätt inimeste kaugjälgimiseks. Sobib ka jahikoerte asukoha määramiseks. Varustatud hädaabi nupuga ja mõeldud omaenda asukoha teistele nähtavaks tegemisel. Sobiv kasutamiseks seiklejatele, ürituste korraldajatele, koeraomanikele, järve- või merejääl kalastajatele. Samuti väga paslik kaubasaadetise või mõne muu vara lühiajaliseks kaugjälgimiseks.
Koos aastase kasutuslitsentsi ja sim-kaardiga.
,   Laoseis: 2
199,00 €
The RAM-B-238U consists of a B size 1" diameter rubber ball on a 2.43" x 1.31" diamond plate. The plate has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM mounts and third party cradles.
,   Laoseis: 2
11,00 €
The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate shaped similarly to the cover that mounts above the cover using the covers screw holes and longer screws. The kit actually comes with 3 sets of screws of differing lengths. The center 2 slots are 2 7/16 inches center to center and are just under a 1/2 inch long. This mount is not compatible with the 2016 BMW R1200RT.
,   Laoseis: 4
34,00 €