RAM MOUNT QUICK-GRIP TELEFONIHOIDJA JUHTMEVABA LAADIJAGA KOOS JUHTRAUA KINNITUSEGA
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Tough-Claw™ Mount with Universal X-Grip® Cradle
- Features a small Tough-Claw™ mounting base and universal X-Grip® cradle
- Mount rotates 360 degrees
- Included spring-loaded, X-Grip® cradle has a clean and clever four-leg design that provides great holding power without hiding your phone; X-Grip® cradle expands and contracts, allowing for a perfect custom fit
- X-Grip® also includes a device tether recommended for outdoor applications
- Clamping range on rail/tube surfaces is 0.625" to 1.5"; clamping range on flat surfaces is 0" to 1.14"
- It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size.
Sarnased tooted
Lowrance kõige kergemini seadistatav kalaleidja HOOK2 4x GPS Bullet on lihtsa menüüga ja automaatsete sonari seadistusega ning lihtsa ja täpse GPS plotteriga.
Hook2-4x GPS Bullet põhiomadused:
- 4-tolline SolarMAX™ ekraan
- Autotuning sonar-Muudab sonari pildi automaatselt kvaliteetsemaks, mistõttu puudub vajadus käsitsi seadete korrigeerimiseks. Samas on ka võimalus seadeid käsitsi muuta.
- Mugav kasutada- Lihtne ja käepärane menüü
- Lowrance® Wide-Angle Broadband sonar (kaks korda tavalisest laiem tuvastusala)
-Sisse-ehitatud lihtne ja täpne GPS plotter, mis võimaldab salvestada teekonnapunkte ning navigeerida lemmik kalastuskohta.
https://www.marine.ee/et/a/hook2-4x-gps-bullet-skimmer-row
Hook2-4x GPS Bullet põhiomadused:
- 4-tolline SolarMAX™ ekraan
- Autotuning sonar-Muudab sonari pildi automaatselt kvaliteetsemaks, mistõttu puudub vajadus käsitsi seadete korrigeerimiseks. Samas on ka võimalus seadeid käsitsi muuta.
- Mugav kasutada- Lihtne ja käepärane menüü
- Lowrance® Wide-Angle Broadband sonar (kaks korda tavalisest laiem tuvastusala)
-Sisse-ehitatud lihtne ja täpne GPS plotter, mis võimaldab salvestada teekonnapunkte ning navigeerida lemmik kalastuskohta.
https://www.marine.ee/et/a/hook2-4x-gps-bullet-skimmer-row
, Laoseis: 1
176,90 €
The RAM® Torque™ handlebar and rail mounting base has a 1” rubber ball and accommodates bars 1 1/8” to 1 1/2” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments.
, Laoseis: 2
34,57 €
The RAM-B-272U consists of a 1" diameter ball and base with 9mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-272U is BMW.
, Laoseis: 1
22,37 €
The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate shaped similarly to the cover that mounts above the cover using the covers screw holes and longer screws. The kit actually comes with 3 sets of screws of differing lengths. The center 2 slots are 2 7/16 inches center to center and are just under a 1/2 inch long. This mount is not compatible with the 2016 BMW R1200RT.
, Laoseis: 2
34,57 €
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
, Laoseis: 1
5,08 €