RamMount
Järjesta:
Kuva: Nimekirjana / Võrgustikuna
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
, Laoseis: 1
55,00 €
Cradle Dimensions:
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
, Laoseis: 2
46,00 €
The RAM-B-349-1U includes a M10 x 1.5 pitch male thread connected to a 1" rubber ball. The diameter of the round flange is 14.3mm and the thread length is 10.5mm.
, Laoseis: 1
21,35 €
The RAM-B-349U includes a M10 x 1.25 pitch male thread connected to a 1" rubber ball. Threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch with a 14.5mm flange diameter with a 10.15mm thread length.
, Laoseis: 1
16,50 €
The RAM-B-224-1U consists of a 3.3" diameter suction cup twist lock base that is connected to the (RAM-B-238U), diamond base with B size 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.
, Laoseis: 2
26,43 €
The RAM-B-231ZU consists of a B size 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".
, Laoseis: 1
25,50 €
The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of any listed compatible motorcycle. We include the hardware you need to mount to the fill port as well.
, Laoseis: 1
59,98 €
The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.
, Laoseis: 1
45,75 €
The RAM® Torque™ handlebar and rail mounting base has a 1” rubber ball and accommodates bars 1 1/8” to 1 1/2” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments.
, Laoseis: 1
34,57 €
The RAM® Motorcycle Fork Stem Base is one of the cleanest and most popular solutions for mounting your device cleanly on the center of your bike. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 - 38mm (.5” – 1.49”).
, Laoseis: 2
26,43 €
The RAM-B-252U marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick).
, Laoseis: 1
19,32 €
The RAM-B-252U marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick).
(QTY. 1) 1" Rubber ball
(QTY. 1) M8 x 55 bolt (1.25 thread pitch)
(QTY. 1) M8 x 60 bolt (1.25 thread pitch)
(QTY. 1) M8 x 65 bolt (1.25 thread pitch)
(QTY. 1) 1" Rubber ball
(QTY. 1) M8 x 55 bolt (1.25 thread pitch)
(QTY. 1) M8 x 60 bolt (1.25 thread pitch)
(QTY. 1) M8 x 65 bolt (1.25 thread pitch)
, Laoseis: 1
19,32 €
The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate shaped similarly to the cover that mounts above the cover using the covers screw holes and longer screws. The kit actually comes with 3 sets of screws of differing lengths. The center 2 slots are 2 7/16 inches center to center and are just under a 1/2 inch long. This mount is not compatible with the 2016 BMW R1200RT.
, Laoseis: 1
34,57 €
Eluaegse plastosade garantiiga peeglikomplekt adventure ja touring mootorratastele. Peegliklaas on valmistatud tugevdatud klaasist. Klaasi mõõdud 135x95mm. Klaas on vahetatav. Peegli täispikkus 175mm. Komplekt sisaldab kõike vajalikku paigaldamiseks: peegel, ühendusjätk 155mm, alumine montaazi kuul ja poldid, paigaldamise juhend. Peeglil on SAE ja CE sertifikaat. Pakendis üks peegel.
, Laoseis: 9
99,00 €
Eluaegse plastosade garantiiga peeglikomplekt enduro mootorratastele. Peegliklaas on valmistatud tugevdatud klaasist. Klaasi läbimõõt 100mm. Peegliklaas on vahetatav. Peegli täispikkus 215mm. Komplekt sisaldab kõike vajalikku paigaldamiseks: peegel, ühendusjätk 89mm, alumine montaazi kuul ja poldid, paigaldamise juhend. Peeglil on SAE ja CE sertifikaat. Pakendis üks peegel.
, Laoseis: 4
99,00 €
The RAM-B-349U includes a M10 x 1.25 pitch male thread connected to a 1" rubber ball. Threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch with a 14.5mm flange diameter with a 10.15mm thread length.
, Laoseis: 1
44,73 €
Cradle Dimensions:
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"
, Laoseis: 2
4,58 €
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
, Laoseis: 1
87,00 €
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
, Laoseis: 1
76,25 €
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
, Laoseis: 1
95,00 €
Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"
, Laoseis: 1
50,83 €
The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate shaped similarly to the cover that mounts above the cover using the covers screw holes and longer screws. The kit actually comes with 3 sets of screws of differing lengths. The center 2 slots are 2 7/16 inches center to center and are just under a 1/2 inch long. This mount is not compatible with the 2016 BMW R1200RT.
, Laoseis: 1
34,00 €