GPS, NAVIGATSIOON, KAAMERA, KOTID-KESTAD, JUHTMED-PESAD

Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"

Seadme ostjale kaart soodushinnaga 49.- eurot

Veekindel, kompaktne seade eeskätt inimeste kaugjälgimiseks. Sobib ka jahikoerte asukoha määramiseks. Varustatud hädaabi nupuga ja mõeldud omaenda asukoha teistele nähtavaks tegemisel. Sobiv kasutamiseks seiklejatele, ürituste korraldajatele, koeraomanikele, järve- või merejääl kalastajatele. Samuti väga paslik kaubasaadetise või mõne muu vara lühiajaliseks kaugjälgimiseks.
Koos aastase kasutuslitsentsi ja sim-kaardiga.

Pisike kompaktne seade sisuliselt mistahes tehnika kaugjälgimiseks.
FMB920 näol on tegemist seadmega, mis paigaldatakse „silma alt ära“. Kontrolleri väikesed mõõdud ja väline GPS antenn võimaldavad seadmele alati leida sobiva paigalduskoha selliselt, et see poleks lihtsalt leitav, kuid toimiks eeskujulikult.
Seadmega saab ühendada kütuse nivooanduri, termomeetri, ID võtme.
Kasuataja saab seadet rakendada keskonna temperatuuri mõõtmiseks, ühepaagiliste masinate kütusemonitooringuks, juhtide identifitseerimiseks ning nende tööaja arvestamiseks.
Hinnas telefonikaart ja aastane kasutamislitsents.
Veekindlus IP54

Pisike kompaktne seade sisuliselt mistahes tehnika kaugjälgimiseks.
FMB920 näol on tegemist seadmega, mis paigaldatakse „silma alt ära“. Kontrolleri väikesed mõõdud ja väline GPS antenn võimaldavad seadmele alati leida sobiva paigalduskoha selliselt, et see poleks lihtsalt leitav, kuid toimiks eeskujulikult.
Seadmega saab ühendada kütuse nivooanduri, termomeetri, ID võtme.
Kasuataja saab seadet rakendada keskonna temperatuuri mõõtmiseks, ühepaagiliste masinate kütusemonitooringuks, juhtide identifitseerimiseks ning nende tööaja arvestamiseks.
Hinnas telefonikaart ja aastane kasutamislitsents.
Veekindlus IP65

The RAM-B-349U includes a M10 x 1.25 pitch male thread connected to a 1" rubber ball. Threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch with a 14.5mm flange diameter with a 10.15mm thread length.

Lowrance®-i Elite FS9 koos aktiivse kujutise kolm-ühes muunduriga (ROW) Uus Elite™ Fishing System (FS) annab teile juurdepääsu Lowrance'i kalaleidmistööriistade täielikule valikule – sealhulgas ActiveTarget™ live sonar, Active Imaging™, FishReveal™ ja eellaaditud C-MAP® Contour™ + kaardid – kõik soodsama hinnaga kui teised selle kategooria kalaleidjad/kaardiplotterid
Täpsemalt: https://www.marine.ee/et/a/elite-fs-9-with-active-imaging-3-in-1-transducer-row

Lowrance kõige kergemini seadistatav kalaleidja HOOK2 4x Bullet on lihtsa menüüga ja automaatsete sonari seadistusega.
Hook2-4x põhiomadused:
- 4-tolline SolarMAX™ ekraan
- Autotuning sonar-Muudab sonari pildi automaatselt kvaliteetsemaks, mistõttu puudub vajadus käsitsi seadete korrigeerimiseks. Samas on ka võimalus seadeid käsitsi muuta.
- Mugav kasutada- Lihtne ja käepärane eestikeelne menüü
- Lowrance® Wide-Angle Broadband sonar (kaks korda tavalisest laiem tuvastusala)

Lowrance kõige kergemini seadistatav kalaleidja HOOK2 4x GPS Bullet on lihtsa menüüga ja automaatsete sonari seadistusega ning lihtsa ja täpse GPS plotteriga.
Hook2-4x GPS Bullet põhiomadused:
- 4-tolline SolarMAX™ ekraan
- Autotuning sonar-Muudab sonari pildi automaatselt kvaliteetsemaks, mistõttu puudub vajadus käsitsi seadete korrigeerimiseks. Samas on ka võimalus seadeid käsitsi muuta.
- Mugav kasutada- Lihtne ja käepärane menüü
- Lowrance® Wide-Angle Broadband sonar (kaks korda tavalisest laiem tuvastusala)
-Sisse-ehitatud lihtne ja täpne GPS plotter, mis võimaldab salvestada teekonnapunkte ning navigeerida lemmik kalastuskohta.
https://www.marine.ee/et/a/hook2-4x-gps-bullet-skimmer-row

Lowrance FishHunter on juhtmevaba andur, mis kuvab veealuse pildi tasuta rakenduse abil nutiseadme ekraanile. Seade töötab WiFi võrgus Androidi ja iOSi telefonide ning tahvelarvutitega. WiFi ühendusega kalaleidja eeliseks on neli korda kiirem ühendus võrreldes seadmega, mis kasutab Bluetoothi.

The RAM-B-349-1U includes a M10 x 1.5 pitch male thread connected to a 1" rubber ball. The diameter of the round flange is 14.3mm and the thread length is 10.5mm.

The RAM® Motorcycle Fork Stem Base is one of the cleanest and most popular solutions for mounting your device cleanly on the center of your bike. This part is designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 12 - 38mm (.5” – 1.49”).

The RAM-B-224-1U consists of a 3.3" diameter suction cup twist lock base that is connected to the (RAM-B-238U), diamond base with B size 1" rubber ball. The suction cup is designed to have an extra strong hold on any smooth non-porous surface, but for best result, mount the suction cup on a glass or non-porous plastic surface.

The RAM-B-231ZU consists of a B size 1" rubber ball designed to sit at right angles to the mounting rail. The zinc coated metal u-bolt accommodates rails in diameter from 0.5" to 1.25" in diameter. Included are black cover caps to be placed over the exposed ends of the u-bolt and a composite adapter that can narrow the rail to a minimum width of 0.5".

The RAM® Torque™ handlebar and rail mounting base has a 1” rubber ball and accommodates bars 1 1/8” to 1 1/2” in diameter. Sizing inserts are included to provide a snug fit and protection of the rail. The mount utilizes nylon-insert locknuts to prevent loosening in high vibration environments.

The RAM Tough-Claw™ is the perfect mounting base for quick and easy tool-less installation and removal on round, square, odd shaped rails and bars. The Tough-Claw™ can be clamped on rails from 0.625" - 1.5" outer diameter. Ideal for mounting tablets, action cameras, smartphones, rod holders for rod storage and much more in a wide variety of applications. Perfectly suited for mounting on the yoke of an aircraft, handlebars and seat posts of bicycles, kayak rails, roll bars and much more, the RAM® Tough-Claw™ will soon become another essential RAM® component in your collection of mounting options.

The RAM-B-252U marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick).

The RAM-B-252U marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick).

(QTY. 1) 1" Rubber ball
(QTY. 1) M8 x 55 bolt (1.25 thread pitch)
(QTY. 1) M8 x 60 bolt (1.25 thread pitch)
(QTY. 1) M8 x 65 bolt (1.25 thread pitch)

The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate shaped similarly to the cover that mounts above the cover using the covers screw holes and longer screws. The kit actually comes with 3 sets of screws of differing lengths. The center 2 slots are 2 7/16 inches center to center and are just under a 1/2 inch long. This mount is not compatible with the 2016 BMW R1200RT.

The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate shaped similarly to the cover that mounts above the cover using the covers screw holes and longer screws. The kit actually comes with 3 sets of screws of differing lengths. The center 2 slots are 2 7/16 inches center to center and are just under a 1/2 inch long. This mount is not compatible with the 2016 BMW R1200RT.

The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder coated aluminum base mounts directly to the stock gas tank of any listed compatible motorcycle. We include the hardware you need to mount to the fill port as well.

Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"

Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"

Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"

Cradle Dimensions:
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"

Minimum Width = 1.75" (Minimum Height = 5.5")
Maximum Width = 4.5" (Minimum Height = 3.25")
Depth = 0.875"

Cradle Dimensions:
Minimum Width = 1.875" (Minimum Height = 4.25")
Maximum Width = 3.25" (Minimum Height = 2.25")
Depth = 0.875"