USB PESA 2,1A LÜLITIGA

The RAM-B-349-1U includes a M10 x 1.5 pitch male thread connected to a 1" rubber ball. The diameter of the round flange is 14.3mm and the thread length is 10.5mm.

The RAM-B-349U includes a M10 x 1.25 pitch male thread connected to a 1" rubber ball. Threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch with a 14.5mm flange diameter with a 10.15mm thread length.

The RAM-B-252U marine grade aluminum base consists of a 1" diameter ball and 2.25" x 0.875" base with 11mm hole. This part is often used on motorcycles, attaching to the mirror frame, the main brand of bike for the RAM-B-252U is BMW. This part fits well on many handlebar pinchbolts with a washer (base is 5mm thick).

(QTY. 1) 1" Rubber ball
(QTY. 1) M8 x 55 bolt (1.25 thread pitch)
(QTY. 1) M8 x 60 bolt (1.25 thread pitch)
(QTY. 1) M8 x 65 bolt (1.25 thread pitch)

The RAM-B-346U base fits cleanly over your existing brake/clutch reservoir cover with the 1" ball offset. Made of die cast aluminum with an over molded rubber ball, both form and function are unsurpassed. Installation is simple and all necessary hardware is included. The mount is NOT an additional reservoir cover, but instead a plate shaped similarly to the cover that mounts above the cover using the covers screw holes and longer screws. The kit actually comes with 3 sets of screws of differing lengths. The center 2 slots are 2 7/16 inches center to center and are just under a 1/2 inch long. This mount is not compatible with the 2016 BMW R1200RT.